I.1 Random Walks

Imagine you are standing in the middle of a balance beam. Every ten seconds, you flip a coin. Heads, take a step forward. Tails, take a step backward. This is a random walk—a path defined as a series of random steps. Stepping off that balance beam and onto the floor, you could perform a random walk in two dimensions by flipping that same coin twice with the following results:

Yes, this may seem like a particularly unsophisticated algorithm. Nevertheless, random walks can be used to model phenomena that occur in the real world, from the movements of molecules in a gas to the behavior of a gambler spending a day at the casino. As for us, we begin this book studying a random walk with three goals in mind.

I.2 The Random Walker Class

Let’s review a bit of object-oriented programming (OOP) first by building a Walker object. This will be only a cursory review. If you have never worked with OOP before, you may want something more comprehensive; I’d suggest stopping here and reviewing the basics on the Processing website before continuing.

An object in Processing is an entity that has both data and functionality. We are looking to design a Walker object that both keeps track of its data (where it exists on the screen) and has the capability to perform certain actions (such as draw itself or take a step).

A class is the template for building actual instances of objects. Think of a class as the cookie cutter; the objects are the cookies themselves.

Let’s begin by defining the Walker class—what it means to be a Walker object. The Walker only needs two pieces of data—a number for its x-location and one for its y-location.

class Walker {

  int x;
  int y;

Every class must have a constructor, a special function that is called when the object is first created. You can think of it as the object’s setup(). There, we’ll initialize the Walker’s starting location (in this case, the center of the window).

  Walker() {
    x = width/2;
    y = height/2;
  }

Finally, in addition to data, classes can be defined with functionality. In this example, a Walker has two functions. We first write a function that allows the object to display itself (as a white dot).

  void display() {
    stroke(0);
    point(x,y);
  }

The second function directs the Walker object to take a step. Now, this is where things get a bit more interesting. Remember that floor on which we were taking random steps? Well, now we can use a Processing window in that same capacity. There are four possible steps. A step to the right can be simulated by incrementing x (x++); to the left by decrementing x (x--); forward by going down a pixel (y++); and backward by going up a pixel (y--). How do we pick from these four choices? Earlier we stated that we could flip two coins. In Processing, however, when we want to randomly choose from a list of options, we can pick a random number using random().

  void step() {

    int choice = int(random(4));

The above line of code picks a random floating point number between 0 and 4 and converts it to an integer, with a result of 0, 1, 2, or 3. Technically speaking, the highest number will never be 4.0, but rather 3.999999999 (with as many 9s as there are decimal places); since the process of converting to an integer lops off the decimal place, the highest int we can get is 3. Next, we take the appropriate step (left, right, up, or down) depending on which random number was picked.

    if (choice == 0) {
      x++;
    } else if (choice == 1) {
      x--;
    } else if (choice == 2) {
      y++;
    } else {
      y--;
    }

  }
}

Now that we’ve written the class, it’s time to make an actual Walker object in the main part of our sketch—setup() and draw(). Assuming we are looking to model a single random walk, we declare one global variable of type Walker.

Walker w;

Then we create the object in setup() by calling the constructor with the new operator.

Example I.1: Traditional random walk

Each time you see the above Example heading in this book, it means there is a corresponding code example available on GitHub.

void setup() {
  size(640,360);

  w = new Walker();
  background(255);
}

Finally, during each cycle through draw(), we ask the Walker to take a step and draw a dot.

void draw() {

  w.step();
  w.display();

}

Since we only draw the background once in setup(), rather than clearing it continually each time through draw(), we see the trail of the random walk in our Processing window.

There are a couple improvements we could make to the random walker. For one, this Walker’s step choices are limited to four options—up, down, left, and right. But any given pixel in the window has eight possible neighbors, and a ninth possibility is to stay in the same place.

Figure I.1

To implement a Walker object that can step to any neighboring pixel (or stay put), we could pick a number between 0 and 8 (nine possible choices). However, a more efficient way to write the code would be to simply pick from three possible steps along the x-axis (-1, 0, or 1) and three possible steps along the y-axis.

  void step() {

    int stepx = int(random(3))-1;
    int stepy = int(random(3))-1;

    x += stepx;
    y += stepy;
  }

Taking this further, we could use floating point numbers (i.e. decimal numbers) for x and y instead and move according to an arbitrary random value between -1 and 1.

  void step() {

    float stepx = random(-1, 1);
    float stepy = random(-1, 1);

    x += stepx;
    y += stepy;
  }

All of these variations on the “traditional” random walk have one thing in common: at any moment in time, the probability that the Walker will take a step in a given direction is equal to the probability that the Walker will take a step in any direction. In other words, if there are four possible steps, there is a 1 in 4 (or 25%) chance the Walker will take any given step. With nine possible steps, it’s a 1 in 9 (or 11.1%) chance.

Conveniently, this is how the random() function works. Processing’s random number generator (which operates behind the scenes) produces what is known as a “uniform” distribution of numbers. We can test this distribution with a Processing sketch that counts each time a random number is picked and graphs it as the height of a rectangle.

Example I.2: Random number distribution

int[] randomCounts;
 
void setup() {
  size(640,240);
  randomCounts = new int[20];
}
 
void draw() {
  background(255);
 

  int index = int(random(randomCounts.length));
  randomCounts[index]++;
 
  stroke(0);
  fill(175);
  int w = width/randomCounts.length;

  for (int x = 0; x < randomCounts.length; x++) {
    rect(x*w,height-randomCounts[x],w-1,randomCounts[x]);
  }

}

The above screenshot shows the result of the sketch running for a few minutes. Notice how each bar of the graph differs in height. Our sample size (i.e. the number of random numbers we’ve picked) is rather small and there are some occasional discrepancies, where certain numbers are picked more often. Over time, with a good random number generator, this would even out.

I.3 Probability and Non-Uniform Distributions

Remember when you first started programming in Processing? Perhaps you wanted to draw a lot of circles on the screen. So you said to yourself: “Oh, I know. I’ll draw all these circles at random locations, with random sizes and random colors.” In a computer graphics system, it’s often easiest to seed a system with randomness. In this book, however, we’re looking to build systems modeled on what we see in nature. Defaulting to randomness is not a particularly thoughtful solution to a design problem—in particular, the kind of problem that involves creating an organic or natural-looking simulation.

With a few tricks, we can change the way we use random() to produce “non-uniform” distributions of random numbers. This will come in handy throughout the book as we look at a number of different scenarios. When we examine genetic algorithms, for example, we’ll need a methodology for performing “selection”—which members of our population should be selected to pass their DNA to the next generation? Remember the concept of survival of the fittest? Let’s say we have a population of monkeys evolving. Not every monkey will have a equal chance of reproducing. To simulate Darwinian evolution, we can’t simply pick two random monkeys to be parents. We need the more “fit” ones to be more likely to be chosen. We need to define the “probability of the fittest.” For example, a particularly fast and strong monkey might have a 90% chance of procreating, while a weaker one has only a 10% chance.

Let’s pause here and take a look at probability’s basic principles. First we’ll examine single event probability, i.e. the likelihood that a given event will occur.

If you have a system with a certain number of possible outcomes, the probability of the occurrence of a given event equals the number of outcomes that qualify as that event divided by the total number of all possible outcomes. A coin toss is a simple example—it has only two possible outcomes, heads or tails. There is only one way to flip heads. The probability that the coin will turn up heads, therefore, is one divided by two: 1/2 or 50%.

Take a deck of fifty-two cards. The probability of drawing an ace from that deck is:

number of aces / number of cards = 4 / 52 = 0.077 = ~ 8%

The probability of drawing a diamond is:

number of diamonds / number of cards = 13 / 52 = 0.25 = 25%

We can also calculate the probability of multiple events occurring in sequence. To do this, we simply multiply the individual probabilities of each event.

The probability of a coin turning up heads three times in a row is:

(1/2) * (1/2) * (1/2) = 1/8 (or 0.125)

…meaning that a coin will turn up heads three times in a row one out of eight times (each “time” being three tosses).

There are a couple of ways in which we can use the random() function with probability in code. One technique is to fill an array with a selection of numbers—some of which are repeated—then choose random numbers from that array and generate events based on those choices.

int[] stuff = new int[5]

stuff[0] = 1;
stuff[1] = 1;

stuff[2] = 2;
stuff[3] = 3;
stuff[4] = 3;

int index = int(random(stuff.length));

Running this code will produce a 40% chance of printing the value 1, a 20% chance of printing 2, and a 40% chance of printing 3.

We can also ask for a random number (let’s make it simple and just consider random floating point values between 0 and 1) and allow an event to occur only if our random number is within a certain range. For example:

float prob = 0.10;

float r = random(1);
 

if (r < prob) {
   // try again!
}

This method can also be applied to multiple outcomes. Let’s say that Outcome A has a 60% chance of happening, Outcome B, a 10% chance, and Outcome C, a 30% chance. We implement this in code by picking a random float and seeing into what range it falls.

float num = random(1);
 

if (num < 0.6) {
  println("Outcome A");

} else if (num < 0.7) {
  println("Outcome B");

} else {
  println("Outcome C");
}

We could use the above methodology to create a random walker that tends to move to the right. Here is an example of a Walker with the following probabilities:

Example I.3: Walker that tends to move to the right

  void step() {
 
    float r = random(1);

    if (r < 0.4) {
      x++;

    } else if (r < 0.6) {
      x--;
    } else if (r < 0.8) {
      y++;
    } else {
      y--;
    }
  }

I.4 A Normal Distribution of Random Numbers

Let’s go back to that population of simulated Processing monkeys. Your program generates a thousand Monkey objects, each with a height value between 200 and 300 (as this is a world of monkeys that have heights between 200 and 300 pixels).

float h = random(200,300);

Does this accurately depict the heights of real-world beings? Think of a crowded sidewalk in New York City. Pick any person off the street and it may appear that their height is random. Nevertheless, it’s not the kind of random that random() produces. People’s heights are not uniformly distributed; there are a great deal more people of average height than there are very tall or very short ones. To simulate nature, we may want it to be more likely that our monkeys are of average height (250 pixels), yet still allow them to be, on occasion, very short or very tall.

A distribution of values that cluster around an average (referred to as the “mean”) is known as a “normal” distribution. It is also called the Gaussian distribution (named for mathematician Carl Friedrich Gauss) or, if you are French, the Laplacian distribution (named for Pierre-Simon Laplace). Both mathematicians were working concurrently in the early nineteenth century on defining such a distribution.

When you graph the distribution, you get something that looks like the following, informally known as a bell curve:

Figure I.2

Figure I.3

The curve is generated by a mathematical function that defines the probability of any given value occurring as a function of the mean (often written as μ, the Greek letter mu) and standard deviation (σ, the Greek letter sigma).

The mean is pretty easy to understand. In the case of our height values between 200 and 300, you probably have an intuitive sense of the mean (i.e. average) as 250. However, what if I were to say that the standard deviation is 3 or 15? What does this mean for the numbers? The graphs above should give us a hint. The graph on the left shows us the distribution with a very low standard deviation, where the majority of the values cluster closely around the mean. The graph on the right shows us a higher standard deviation, where the values are more evenly spread out from the average.

The numbers work out as follows: Given a population, 68% of the members of that population will have values in the range of one standard deviation from the mean, 98% within two standard deviations, and 99.7% within three standard deviations. Given a standard deviation of 5 pixels, only 0.3% of the monkey heights will be less than 235 pixels (three standard deviations below the mean of 250) or greater than 265 pixels (three standard deviations above the mean of 250).

Luckily for us, to use a normal distribution of random numbers in a Processing sketch, we don’t have to do any of these calculations ourselves. Instead, we can make use of a class known as Random, which we get for free as part of the default Java libraries imported into Processing (see the JavaDocs for more information).

To use the Random class, we must first declare a variable of type Random and create the Random object in setup().

Random generator;
 
void setup() {
  size(640,360);
  generator = new Random();
}

If we want to produce a random number with a normal (or Gaussian) distribution each time we run through draw(), it’s as easy as calling the function nextGaussian().

void draw() {

  float num = (float) generator.nextGaussian();
}

Here’s the thing. What are we supposed to do with this value? What if we wanted to use it, for example, to assign the x-position of a shape we draw on screen?

The nextGaussian() function returns a normal distribution of random numbers with the following parameters: a mean of zero and a standard deviation of one. Let’s say we want a mean of 320 (the center horizontal pixel in a window of width 640) and a standard deviation of 60 pixels. We can adjust the value to our parameters by multiplying it by the standard deviation and adding the mean.

Example I.4: Gaussian distribution

void draw() {

  float num = (float) generator.nextGaussian();
  float sd = 60;
  float mean = 320;
 

  float x = sd * num + mean;
 
  noStroke();
  fill(255,10);
  ellipse(x,180,16,16);
}

By drawing the ellipses on top of each other with some transparency, we can actually see the distribution. The brightest spot is near the center, where most of the values cluster, but every so often circles are drawn farther to the right or left of the center.

I.5 A Custom Distribution of Random Numbers

There will come a time in your life when you do not want a uniform distribution of random values, or a Gaussian one. Let’s imagine for a moment that you are a random walker in search of food. Moving randomly around a space seems like a reasonable strategy for finding something to eat. After all, you don’t know where the food is, so you might as well search randomly until you find it. The problem, as you may have noticed, is that random walkers return to previously visited locations many times (this is known as “oversampling”). One strategy to avoid such a problem is to, every so often, take a very large step. This allows the walker to forage randomly around a specific location while periodically jumping very far away to reduce the amount of oversampling. This variation on the random walk (known as a Lévy flight) requires a custom set of probabilities. Though not an exact implementation of a Lévy flight, we could state the probability distribution as follows: the longer the step, the less likely it is to be picked; the shorter the step, the more likely.

Earlier in this prologue, we saw that we could generate custom probability distributions by filling an array with values (some duplicated so that they would be picked more frequently) or by testing the result of random(). We could implement a Lévy flight by saying that there is a 1% chance of the walker taking a large step.

float r = random(1);

if (r < 0.01) {
  xstep = random(-100,100);
  ystep = random(-100,100);

} else {
  xstep = random(-1,1);
  ystep = random(-1,1);
}

However, this reduces the probabilities to a fixed number of options. What if we wanted to make a more general rule—the higher a number, the more likely it is to be picked? 3.145 would be more likely to be picked than 3.144, even if that likelihood is just a tiny bit greater. In other words, if x is the random number, we could map the likelihood on the y-axis with y = x.

Figure I.4

If we can figure out how to generate a distribution of random numbers according to the above graph, then we will be able to apply the same methodology to any curve for which we have a formula.

One solution is to pick two random numbers instead of one. The first random number is just that, a random number. The second one, however, is what we’ll call a “qualifying random value.” It will tell us whether to use the first one or throw it away and pick another one. Numbers that have an easier time qualifying will be picked more often, and numbers that rarely qualify will be picked infrequently. Here are the steps (for now, let’s consider only random values between 0 and 1):

Here we are saying that the likelihood that a random value will qualify is equal to the random number itself. Let’s say we pick 0.1 for R1. This means that R1 will have a 10% chance of qualifying. If we pick 0.83 for R1 then it will have a 83% chance of qualifying. The higher the number, the greater the likelihood that we will actually use it.

Here is a function (named for the Monte Carlo method, which was named for the Monte Carlo casino) that implements the above algorithm, returning a random value between 0 and 1.

float montecarlo() {

  while (true) {

    float r1 = random(1);

    float probability = r1;

    float r2 = random(1);
 

    if (r2 < probability) {
      return r1;
    }

  }
}

  float stepsize = random(0,10);
 
  float stepx = random(-stepsize,stepsize);
  float stepy = random(-stepsize,stepsize);
 
  x += stepx;
  y += stepy;

I.6 Perlin Noise (A Smoother Approach)

A good random number generator produces numbers that have no relationship and show no discernible pattern. As we are beginning to see, a little bit of randomness can be a good thing when programming organic, lifelike behaviors. However, randomness as the single guiding principle is not necessarily natural. An algorithm known as “Perlin noise,” named for its inventor Ken Perlin, takes this concept into account. Perlin developed the noise function while working on the original Tron movie in the early 1980s; it was designed to create procedural textures for computer-generated effects. In 1997 Perlin won an Academy Award in technical achievement for this work. Perlin noise can be used to generate various effects with natural qualities, such as clouds, landscapes, and patterned textures like marble.

Perlin noise has a more organic appearance because it produces a naturally ordered (“smooth”) sequence of pseudo-random numbers. The graph on the left below shows Perlin noise over time, with the x-axis representing time; note the smoothness of the curve. The graph on the right shows pure random numbers over time. (The code for generating these graphs is available in the accompanying book downloads.)

Figure I.5: Noise

Figure I.6: Random

Processing has a built-in implementation of the Perlin noise algorithm: the function noise(). The noise() function takes one, two, or three arguments, as noise is computed in one, two, or three dimensions. Let’s start by looking at one-dimensional noise.

Consider drawing a circle in our Processing window at a random x-location.

float x = random(0,width);
ellipse(x,180,16,16);

Now, instead of a random x-location, we want a Perlin noise x-location that is “smoother.” You might think that all you need to do is replace random() with noise(), i.e.

float x = noise(0,width);

While conceptually this is exactly what we want to do—calculate an x-value that ranges between 0 and the width according to Perlin noise—this is not the correct implementation. While the arguments to the random() function specify a range of values between a minimum and a maximum, noise() does not work this way. Instead, the output range is fixed—it always returns a value between 0 and 1. We’ll see in a moment that we can get around this easily with Processing’s map() function, but first we must examine what exactly noise() expects us to pass in as an argument.

We can think of one-dimensional Perlin noise as a linear sequence of values over time. For example:

Now, in order to access a particular noise value in Processing, we have to pass a specific "moment in time" to the noise() function. For example:

float n = noise(3);

According to the above table, noise(3) will return 0.364 at time equals 3. We could improve this by using a variable for time and asking for a noise value continuously in draw().

float t = 3;
 
void draw() {

  float n = noise(t);
  println(n);
}

The above code results in the same value printed over and over. This happens because we are asking for the result of the noise() function at the same point in time—3—over and over. If we increment the time variable t, however, we’ll get a different result.

float t = 0;
 
void draw() {
  float n = noise(t);
  println(n);

  t += 0.01;
}

How quickly we increment t also affects the smoothness of the noise. If we make large jumps in time, then we are skipping ahead and the values will be more random.

Figure I.7

Try running the code several times, incrementing t by 0.01, 0.02, 0.05, 0.1, 0.0001, and you will see different results.

Mapping Noise

Now we’re ready to answer the question of what to do with the noise value. Once we have the value with a range between 0 and 1, it’s up to us to map that range to what we want. The easiest way to do this is with Processing’s map() function. The map() function takes five arguments. First up is the value we want to map, in this case n. Then we have to give it the value’s current range (minimum and maximum), followed by our desired range.

Figure I.8

In this case, we know that noise has a range between 0 and 1, but we’d like to draw our circle with a range between 0 and the window’s width.

Show Raw float t = 0; void draw() { float n = noise(t); // Using map() to customize the range of Perlin noise float x = map(n,0,1,0,width); ellipse(x,180,16,16); t += 0.01; }

float t = 0;
 
void draw() {
  float n = noise(t);

Using map() to customize the range of Perlin noise

  float x = map(n,0,1,0,width);
  ellipse(x,180,16,16);
 
  t += 0.01;
}

We can apply the exact same logic to our random walker, and assign both its x- and y-values according to Perlin noise.

Your browser does not support the canvas tag.

RESET PAUSE

Example I.5: Perlin noise walker

Show Raw class Walker { float x,y; float tx,ty; Walker() { tx = 0; ty = 10000; } void step() { //[full] x- and y-location mapped from noise x = map(noise(tx), 0, 1, 0, width); y = map(noise(ty), 0, 1, 0, height); //[end] //[full] Move forward through “time.” tx += 0.01; ty += 0.01; //[end] } }

class Walker {
  float x,y;
 
  float tx,ty;
 
  Walker() {
    tx = 0;
    ty = 10000;
  }
 
  void step() {

x- and y-location mapped from noise

    x = map(noise(tx), 0, 1, 0, width);
    y = map(noise(ty), 0, 1, 0, height);

Move forward through “time.”

    tx += 0.01;
    ty += 0.01;

  }
}

Notice how the above example requires an additional pair of variables: tx and ty. This is because we need to keep track of two time variables, one for the x-location of the Walker object and one for the y-location. But there is something a bit odd about these variables. Why does tx start at 0 and ty at 10,000? While these numbers are arbitrary choices, we have very specifically initialized our two time variables with different values. This is because the noise function is deterministic: it gives you the same result for a specific time t each and every time. If we asked for the noise value at the same time t for both x and y, then x and y would always be equal, meaning that the Walker object would only move along a diagonal. Instead, we simply use two different parts of the noise space, starting at 0 for x and 10,000 for y so that x and y can appear to act independently of each other.

Figure I.9

In truth, there is no actual concept of time at play here. It’s a useful metaphor to help us understand how the noise function works, but really what we have is space, rather than time. The graph above depicts a linear sequence of noise values in a one-dimensional space, and we can ask for a value at a specific x-location whenever we want. In examples, you will often see a variable named xoff to indicate the x-offset along the noise graph, rather than t for time (as noted in the diagram).

Exercise I.7

In the above random walker, the result of the noise function is mapped directly to the Walker’s location. Create a random walker where you instead map the result of the noise() function to a Walker’s step size.

Two-Dimensional Noise

This idea of noise values living in a one-dimensional space is important because it leads us right into a discussion of two-dimensional space. Let’s think about this for a moment. With one-dimensional noise, we have a sequence of values in which any given value is similar to its neighbor. Because the value is in one dimension, it only has two neighbors: a value that comes before it (to the left on the graph) and one that comes after it (to the right).

Figure I.10: 1D Noise

Figure I.11: 2D Noise

Two-dimensional noise works exactly the same way conceptually. The difference of course is that we aren’t looking at values along a linear path, but values that are sitting on a grid. Think of a piece of graph paper with numbers written into each cell. A given value will be similar to all of its neighbors: above, below, to the right, to the left, and along any diagonal.

If you were to visualize this graph paper with each value mapped to the brightness of a color, you would get something that looks like clouds. White sits next to light gray, which sits next to gray, which sits next to dark gray, which sits next to black, which sits next to dark gray, etc.

This is why noise was originally invented. You tweak the parameters a bit or play with color to make the resulting image look more like marble or wood or any other organic texture.

Let’s take a quick look at how to implement two-dimensional noise in Processing. If you wanted to color every pixel of a window randomly, you would need a nested loop, one that accessed each pixel and picked a random brightness.

Show Raw loadPixels(); for (int x = 0; x < width; x++) { for (int y = 0; y < height; y++) { // A random brightness! float bright = random(255); pixels[x+y*width] = color(bright); } } updatePixels();

loadPixels();
for (int x = 0; x < width; x++) {
  for (int y = 0; y < height; y++) {

A random brightness!

    float bright = random(255);
    pixels[x+y*width] = color(bright);
  }
}
updatePixels();

To color each pixel according to the noise() function, we’ll do exactly the same thing, only instead of calling random() we’ll call noise().

Show Raw // A Perlin noise brightness! float bright = map(noise(x,y),0,1,0,255); //[bold]

A Perlin noise brightness!

   float bright = map(noise(x,y),0,1,0,255);

This is a nice start conceptually—it gives you a noise value for every (x,y) location in our two-dimensional space. The problem is that this won’t have the cloudy quality we want. Jumping from pixel 200 to pixel 201 is too large of a jump through noise. Remember, when we worked with one-dimensional noise, we incremented our time variable by 0.01 each frame, not by 1! A pretty good solution to this problem is to just use different variables for the noise arguments. For example, we could increment a variable called xoff each time we move horizontally, and a yoff variable each time we move vertically through the nested loops.

Example I.6: 2D Perlin noise

Show Raw // Start xoff at 0. float xoff = 0.0; //[bold] for (int x = 0; x < width; x++) { // For every xoff, start yoff at 0. float yoff = 0.0; //[bold] for (int y = 0; y < height; y++) { // Use xoff and yoff for noise(). float bright = map(noise(xoff,yoff),0,1,0,255); //[bold] // Use x and y for pixel location. pixels[x+y*width] = color(bright); // Increment yoff. yoff += 0.01; //[bold] } // Increment xoff. xoff += 0.01; //[bold] }

Start xoff at 0.

float xoff = 0.0;
 
for (int x = 0; x < width; x++) {

For every xoff, start yoff at 0.

  float yoff = 0.0;
 
  for (int y = 0; y < height; y++) {

Use xoff and yoff for noise().

    float bright = map(noise(xoff,yoff),0,1,0,255);

Use x and y for pixel location.

    pixels[x+y*width] = color(bright);

Increment yoff.

    yoff += 0.01;
  }

Increment xoff.

  xoff += 0.01;
}

Exercise I.8

Play with color, noiseDetail(), and the rate at which xoff and yoff are incremented to achieve different visual effects.

Exercise I.9

Add a third argument to noise that increments once per cycle through draw() to animate the two-dimensional noise.

Exercise I.10

Use the noise values as the elevations of a landscape. See the screenshot below as a reference.

We’ve examined several traditional uses of Perlin noise in this section. With one-dimensional noise, we used smooth values to assign the location of an object to give the appearance of wandering. With two-dimensional noise, we created a cloudy pattern with smoothed values on a plane of pixels. It’s important to remember, however, that Perlin noise values are just that—values. They aren’t inherently tied to pixel locations or color. Any example in this book that has a variable could be controlled via Perlin noise. When we model a wind force, its strength could be controlled by Perlin noise. Same goes for the angles between the branches in a fractal tree pattern, or the speed and direction of objects moving along a grid in a flow field simulation.

Your browser does not support the canvas tag.

RESET PAUSE

Figure I.12: Tree with Perlin noise

Your browser does not support the canvas tag.

RESET PAUSE

Figure I.13: Flow field with Perlin noise

I.7 Onward

We began this chapter by talking about how randomness can be a crutch. In many ways, it’s the most obvious answer to the kinds of questions we ask continuously—how should this object move? What color should it be? This obvious answer, however, can also be a lazy one.

As we finish off the introduction, it’s also worth noting that we could just as easily fall into the trap of using Perlin noise as a crutch. How should this object move? Perlin noise! What color should it be? Perlin noise! How fast should it grow? Perlin noise!

The point of all of this is not to say that you should or shouldn’t use randomness. Or that you should or shouldn’t use Perlin noise. The point is that the rules of your system are defined by you, and the larger your toolbox, the more choices you’ll have as you implement those rules. The goal of this book is to fill your toolbox. If all you know is random, then your design thinking is limited. Sure, Perlin noise helps, but you’ll need more. A lot more.

I think we’re ready to begin.